The building.
Rooms, walls, insulation and openings, drawn to the real dimensions.
We model the building with its equipment and run it as a simulation. You see the loads, the climate and the weak points while changes are still free.
Rooms, walls, insulation and openings, drawn to the real dimensions.
Heating, cooling, ventilation, power, water and controls, placed where they will sit.
What happens inside: the heat, moisture and load it adds, and the schedule it runs on.
Readings from your sensors and controllers, so the model is checked against the real building.
The model runs hour by hour, through a normal day and a bad one.
Heating, cooling, dehumidification, airflow and electrical load, calculated for every room.
A unit goes down, the power drops, the weather turns. You see how long you have.
Energy and water by the hour, before the first utility bill.
The method is the same in every building. What changes is what the room has to hold.
Holding temperature through door openings, defrost cycles and a compressor failure.
Exhaust and make-up air, heat from the line, and the electrical and gas load behind it.
Air changes, pressure between rooms, and temperature and humidity held inside a tight band.
Cooling against the heat load, and how long the room lasts when a unit drops out.
Ventilation, heat from machines, power distribution, and how the layout moves people and material.
Everything comes from the same model, so the numbers and the drawings agree.
Load, airflow and electrical calculations, room by room.
Layouts, equipment schedules and installation drawings.
Quantities taken from the model, ready to price.
The model, connected to your sensors after the build, so you can compare the plan with the building.
A 30-minute call with our team, by phone, video or text. Tell us what you run and what needs to change.
Or now.
hello@stackworks.sh